Description

Type 01: Gate Valve (F4) acc. to DIN EN 1074 with Handwheel

Resilient seated – with bare shaft – face to face length acc. to DIN EN 558-1 series 14, F4 of ductile cast iron GGG

DN40 – DN600 PN10, PN16, PN25

Range of application: Drinking Water. All parts in contact with medium according to UBA-KTW and DVGW W270 (optional NBR for sewage water).

Standards:

• Designed according to EN 1074 part 1 & 2, Designed according to EN 1171.
• Face-to-face length according to EN 558 Table 1 Series 14 - F4.
• Standard flange according to EN 1092 (ISO 7005-2), PN 10, 16, 25.
• Tightness according to DIN EN12266-1, leakage rate A.
  
  

Product properties:

• Plastic guide(shoe) in the wedge for reducing torque.
• Large conical spindle opening in the wedge prevents stagnant water.
• Stainless steel spindle with wedge stops and rolled thread for high strength.
• Full circumferential comb ring gives extra grip to stem and provides low torque.
• Protection stem seal with an EPDM wiper, a POM gasket with four EPDM O-rings, and an EPDM lip seal.
• Round, recessed bonnet gasket made of EPDM rubber.
• Recessed and sealed stainless steel body screws enclosed by the hood seal.
• Full opening without constriction.
• Low torque.
• Epoxy coating according to DIN 30677-2.
  
  

Accessoires:

• Square cap
• Handwheel
• Spindle extension
• Street box
• Chain wheel

For detailed technical information, please refer to the product datasheet

Datasheet

Company Certificate​​s​​      Product Certif​​ic​​ates​

(2D/3D) Technical Drawings

For nearly all our products, we provide 2D and 3D technical drawings in STP, DWG, and PDF formats. Below is a selection of our most requested products.

Not all drawings are available on our website. Can't find the model you're looking for? Contact us, and we’ll ensure you receive the correct drawing via email as quickly as possible!